Quickie Ti Titanium

The Quickie® Ti Titanium is the latest addition to our family of ultra-lightweight rigid chairs. Using lightweight titanium tubing, a minimalist design, and several patented features, our engineers have succeeded in developing the perfect balance between form and function. With a chair weight averaging between 15 and 17 lbs., the Quickie Ti Titanium is the best choice for today's active user.
Back To Top

The Titanium Advantage
Titanium alloy is approximately 3 times stronger than aluminum. This advantage in strength makes it possible to build a lighter, simpler frame. Titanium tubing also provides a more controlled rebound and superior torque strength. With an average weight of 16.9 lbs, the Quickie® Ti Titanium is Sunrise Medical's premium rigid-chair choice.

Patent-Pending Caster Pivot-Adjuster
To reduce excess weight and flutter, our engineers have eliminated the caster housing so that the caster fork now threads directly into the frame. A special pivot caster-adjuster allows the forks to pivot 16° in 2° increments. This feature enables the user to adjust the seat "slope" between 1" - 3.5" while maintaining a perpendicular caster-wheel/ground alignment.

Custom Tailored Frame Options
To ensure the best possible fit, our engineers have developed over 4,000 different frame configurations. Each frame can be customized in six different ways: frame angle (70°, 80°, 85°), frame inset (1", 2", 3"), front seat-height (16"- 20" in 1/2" increments), rear seat-height (14"-19" in 1/2" increments), seat width (13"-18"), and seat depth (14"-19).

Easy-To-Load Design
A fold-down back, "L" shaped frame and extremely low frame-weight make vehicle transfers about as easy as loading a briefcase.

The new Quickie® Ti Titanium chair is distinctly different from the Quickie (GPV) Ti Titanium. Its new mono-tube construction and reduced weight create a fresh concept in titanium chair design. The Quickie (GPV) Ti Titanium chair is now referred to as the "Quickie® GPV Titanium".

The rear axle features 4" of center-of-gravity adjustment in 1/2" increments. When a chair is not properly centered, it feels heavy, unresponsive, and sometimes "tippy". By using a 4" adjustment range that accommodates many different body types, this problem can be avoided.

The Quickie Ti Titanium features new fold-down push handles. Push handles sometimes act like fish hooks when pulling a chair out of storage. In contrast, fold-down push handles allow the chair to slide out without hooking everything else.

A special flat area on the axle-sleeve nut corrects toe-in and toe-out in three easy steps: Loosen the camber tube. Place a square against the flat area on the axle-sleeve nut and the ground. Re-tighten the camber tube. The wheels are now aligned.

The axle plate features 3" vertical adjustment in 1/2" increments. This provides plenty of space to adjust wheel sizes, seat height and seat angle.

The rear camber tube is secured to the axle plate with a special compression axle sleeve. The axle sleeve is held together with Torx® head screws. This advanced hardware is superior in design and holding power. A special tool kit containing Torx wrenches ships with the chair.