Quickie Ti Match Point

Does your tennis chair feel heavy? Try the new Quickie Ti Match Point®. Modeled after our highly successful Quickie (aluminum) Ti Match Point, the Quickie Ti Match Point features a titanium seat-frame that cuts over 2.5 lbs off the overall weight. This change and a series of other new options makes the Quickie Ti Match Point one of the most nimble chairs on today's tennis court.

Center-Of-Mass Adjustment System
Our patented center-of-mass adjustment system provides a maximum horizontal (center-of-gravity) adjustment-range of 3.5" and up to 5" of vertical seat-squeeze (or seat dump) adjustment. This combination of adjustment-systems allows users to align their weight over the push-wheels and optimize their seat angles without making changes in fork size, caster size, caster-stem size, or fork-hole location.

Titanium Seat-Frame
Titanium is more than twice as strong as aluminum. This is one reason why it is possible to use much thinner tubing and still maintain overall strength. Unpainted titanium is also more scratch and corrosion resistant.

5th Wheel Anti-Tip
The Quickie Ti Match Point features a standard single integrated fifth-wheel anti-tip. This anti-tip caster allows players to move their weight directly over the rear wheels, providing a tremendous advantage in maneuverability and power.

Anti-Tip Brace
The 5th wheel anti-tip brace is a new option featured on the Quickie Ti Match Point. This adjustable brace, located between the backrest towel bar and the integrated anti-tip, eliminates the rearward flex in the seat frame caused when the player leans backwards. With this option, the player no longer has to adjust to the flex in the seat when serving or leaning back for a slam.

The Quickie Ti Match Point now features special extra-hard caster wheels (92 durometer hardness). The new casters ensure that chair speed and maneuverability are not simply absorbed in the wheels.

A 15" deep base-frame is now available. Not only does this size match the new 10" , 11" and 12" seat depths, but it also provides an option for 13", 14" and 15" seat-depth users who desire a shorter wheelbase for increased maneuverability.

The Quickie Ti Match Point features an extra wide front "footprint" (distance between the caster housings). This additional width provides the necessary stability when a tennis player leans forward and to the side to reach a difficult shot.

Bolt-on toe clips are a new option featured on the Quickie Ti Match Point. These clips hold the players feet on the footplates when they attempt to stretch forward for a difficult shot.

The new ratchet-style positioning belt was inspired by a prototype developed by one of our own athletes. This belt features two sets of locking ratchet-clamps similar to those used in snowboard bindings. These ratchet-clamps allow the tightest possible connection to the chair. The stronger the connection, the easier upper-body movements transfer into chair movement.

Extreme camber options of 16° and 20° offer superior stability and effortless turning.

Product Weight: 20 lbs. (for a 16 x 16 stadard frame-size with no extras)
Product Width: 12 in. - 20 in. seat widths
Product Length/Depth: 10 in. - 20 in. seat depth
Product Height: 16 in. - 21 in. front seat-height (dependent on frame height)
Shipping Dimensions (box 1): 31"w / 24"h / 37"d
Shipping Dimensions (box 2): 55" w / 29"h / 41" d (long frame-length 21")
Ship Method(s): Ground, next day, 2 day, 3 day, or freight carrier (depending on seat size)
Product Weight Capacity: 250 lbs.
Shipping Weight: 50 lbs.
Caster Options 3" Micro's
Rear Wheel Options Spoke wheels and Spinergy sports wheels, 24 in. (540), 24 in. (559), 26 in. (590)
Axle Options Stainless steel, optional titanium or quad-release axles
Camber Options 16 or 20 degrees